Determine safe stocking levels for your aquarium
Avoid overcrowding and maintain healthy water quality. Our calculator considers fish size, bioload, filtration capacity, and territorial requirements—not just the outdated “inch per gallon” rule.
What You’ll Calculate
- Maximum safe stocking capacity
- Current bioload percentage
- Compatibility warnings
- Filtration adequacy
Implementation
Advanced calculation engine that factors in multiple variables for accurate stocking recommendations.
Tank Information
Note: Calculator optimized for typical home/office aquariums (5-300 gallons)
Enter the power consumption of your filter in watts
Plants help reduce bioload by absorbing waste products
Add Fish
Note: This calculator uses bioload indices instead of the outdated “inch per gallon” rule. The listed fish serve as reference points for estimating bioload of similar species.
Results
Filtration Strength
Enter filter wattage to see results
Maximum Safe Stocking Capacity
Add fish and click calculate to see results
Current Bioload Percentage
Add fish and click calculate to see results
Compatibility Warnings
No fish added yet
Planted Tank Benefit
Select planted tank level to see benefits
Fish Database & Features
Our calculator includes a database of common fish species with bioload data, plus options for custom fish entry.
Database Features
- Common fish species with bioload indices
- Custom fish entry option
- Filtration strength based on wattage
- Planted tank bioload reduction factor
Bioload Index Guide
- Low: Small, low-waste fish (tetras, guppies)
- Medium: Moderate waste producers (bettas, angelfish)
- High: Heavy waste producers (goldfish, oscars)
🔥 Controversial Take
Stocking calculators based on ‘one inch per gallon’ are from 1970s fishkeeping. They completely ignore bioload differences between a goldfish (massive waste) and a neon tetra (minimal). I’ve seen people kill fish following that rule. Throw it out.
How the stocking model actually works
Every species in the calculator carries three numbers: an adult body mass, a waste factor, and a territorial footprint. Those three are converted into a bioload unit, and the tank’s capacity is calculated from water volume multiplied by a filtration factor, then divided by the average bioload unit of the fish you selected.
| Item | What it means in practice |
|---|---|
| Body mass | scales with the cube of length, not the length itself. A fish that grows from 2 cm to 6 cm does not triple its load — it multiplies it roughly nine times. |
| Waste factor | separates grazers from predators. A goldfish produces several times the ammonia of a neon tetra of the same length. |
| Territorial footprint | is counted in tank floor area, so bottom dwellers and cave spawners consume capacity even when the water volume looks generous. |
| Filtration factor | credits real media volume and turnover — not the number printed on the box. |
The result is a percentage. Under 70% is comfortable, 70–85% needs disciplined maintenance, and anything above 90% leaves no margin for a missed water change or a filter cleaning.
Two worked examples
20-gallon community tank (75 L, HOB filter rated 100 gph)
The calculator lands at roughly 62% when you enter 8 neon tetras, 6 pygmy corydoras and 1 honey gourami. That looks low for the tank size, and it is deliberate: the corydoras use floor area, the tetras need a group to behave normally, and the gourami claims the upper third. The remaining headroom is what absorbs growth and the occasional overfeeding.
10-gallon betta tank (38 L, sponge filter)
A single betta plus two nerite snails sits near 45%. Adding a school of six small tetras pushes the same tank past 80% and introduces a second problem the percentage does not show: the betta now has to share the upper water column. Volume is not the limit here — behaviour is.
Where any stocking calculator stops being reliable
Four things sit outside the arithmetic, and each one has caused a tank crash that the percentage said was safe.
- Growth. A fish bought at 3 cm is not the fish you will own in eighteen months. Stock for adult size, not the bag size.
- Filtration failure. The model assumes the filter is running and cycled. A power outage or a rinsed-in-tap-water sponge resets the equation within a day.
- Territory and line of sight. Two males of the same species can fail in a tank the calculator rates at 50%, because the limit is sightlines, not litres.
- Oxygen and surface area. Tall, narrow tanks hold the same volume as long, shallow ones but exchange far less gas at the surface.
Treat the number as a ceiling, then check it against behaviour, filtration and the cycle state of the filter before you buy anything.
Frequently asked questions
Is the one-inch-per-gallon rule accurate?
No. It measures length, and length says almost nothing about waste output. Twelve inches of goldfish and twelve inches of neon tetras are not remotely the same load, and the rule also ignores that fish grow.
Should I stock to 100% of the calculated capacity?
No. Aim for 70–80% while fish are still growing, and only approach the ceiling on a mature, heavily filtered tank with a strict water-change routine. The remaining margin is your buffer for disease treatment, power cuts and holiday feeding.
Does a bigger filter let me keep more fish?
It lets the tank process more ammonia, which is only one of the constraints. Territory, oxygen and fish behaviour are unchanged by filtration, so a larger filter does not make a crowded tank acceptable.
How often should I re-run the numbers?
Every time a fish is added, and again at the six-month mark when juveniles have grown. Recalculate after any filter change too, because media volume is part of the model.
Use the aquarium volume calculator first to get real water volume, then come back here. If the result says you are already over 85%, the next step is a larger filtration and maintenance plan, not more fish.
References
- Aquarium Co-Op — Practical aquarium keeping guides based on real experience.
- Seriously Fish — Comprehensive species database with care requirements.